Maxi-Threshing Kit

Maxi-Threshing Kit Short listed for the “International Machinery Manufacturers Awards (IMMA’s) 2016” the final will take place at Cereals 2016 show in the UK, 15th and 16th June 2016 These are a counter threshing system that can be easily fitted to the concave of a combine harvester. They increase the threshing capacity of the concave by circa 10%-15%. With the advancement of crop husbandry our clients were finding it increasingly difficult to thresh grain crops. We initially designed a high output concave which has proven a huge success. We have now gone a step further with the Maxi-Threshing kit which is designed to fit both our high output concave and also standard concaves. The Maxi-Threshing kit is very easy to install to most makes and models of combine harvesters. We have found in our research that in general combine harvesters are using about 85 % of the threshing area of the concave. Our Maxi-Threshing kit not only increases the capacity of the concave to thresh grain crops but it also spreads the crop over 100% of the threshing area of the concave. The combine harvester benefits by faster ground speed cleaner crop sample This picture below is a rasp bar taken from a 2012 Combine Harvester. It shows how uneven the wear is in the separating drum without a Maxi-Thresh Kit fitted. The unworn part of the rasp equals 6 inches on each side of the separating drum, added together this is 12 inches of unused area in the separating drum. Approx the width of 1 straw walker unused. That shows that in general most combines use about 80 % of the available area in the threshing drum. Our Maxi-Threshing Kit provides extra threshing capacity to the concave and also spreads the crop over 100% of the available threshing area. http://www.independent.ie/business/farming/taking-it-to-the-maximum-on-combine-threshing-efficiency-34745565.html